To Study the Effect of Welding Parameters on Tensile Strength in Electric arc Welding

Authors

  • Karuna Karuna Department of Mechanical Engineering ,Technology Education and Research Integrated Institutions Kurukshetra, Haryana, India Author
  • Ravi Kirpala Department of Mechanical Engineering ,Technology Education and Research Integrated Institutions Kurukshetra, Haryana, India Author
  • Hardeep Singh Department of Mechanical Engineering , Guru Nanak Institute of Technology Mullana, Haryana, India Author
  • Kiran Balaa Department of Mechanical Engineering ,Technology Education and Research Integrated Institutions Kurukshetra, Haryana, India Author
  • Vikram Malika Department of Mechanical Engineering ,Technology Education and Research Integrated Institutions Kurukshetra, Haryana, India Author
  • Deepaka Deepaka Department of Mechanical Engineering ,Technology Education and Research Integrated Institutions Kurukshetra, Haryana, India Author

Keywords:

Taguchi design, electric arc welding, Tensile Strength

Abstract

The aim of the work reported here was to utilize Taguchi methods to optimize Tensile Strength in the welding of SS-316. The parameters of Tensile Strength are analyzed under varying welding currents (200A, 250A, 300A.), Weld Time (10Sec., 20sec, 30sec.) The settings of welding parameters were determined by using Taguchi Experimental Design method. The signal to noise ratio is employed to determine the effect of welding parameters on Tensile Strength. The conclusion from the study is that Time is the most significant factor than current for Tensile Strength response; Tensile Strength displaying an increasing trend with an increase in time & Current parameters, for maximum Tensile Strength current is to set at max. level.

References

Downloads

Published

2012-09-30

Issue

Vol.2, No.3 (Jul/Sep 2012)

Section

Articles

How to Cite

To Study the Effect of Welding Parameters on Tensile Strength in Electric arc Welding. (2012). International Journal of Current Engineering and Technology, 2(3), 310-312. https://ijcet.evegenis.org/index.php/ijcet/article/view/69