Experimental Analysis of Hydrodynamic Polishing Process

Authors

  • Sudhir More Department of Mechanical Engineering, Marathwada Mitra Mandas Institute of Technology, SPPU, Pune, India Author
  • Mangesh Darkunde Department of Mechanical Engineering, Marathwada Mitra Mandas Institute of Technology, SPPU, Pune, India Author
  • Kapil Pawar Department of Mechanical Engineering, Marathwada Mitra Mandas Institute of Technology, SPPU, Pune, India Author
  • Sudarshan Dake Department of Mechanical Engineering, Marathwada Mitra Mandas Institute of Technology, SPPU, Pune, India Author

Keywords:

Hydrodynamic Polishing Process, Surface Roughness, Aluminum oxide, abrasive slurry

Abstract

Hydrodynamic polishing (HDP) process is a new method for polishing of the hard materials. In HDP, shear stress is used uniquely for removing material. The material removal takes place with hydrodynamic phenomenon and shear stress. The process has proved itself for any hard material and importantly without abrasive action. Lot of researchers has shown ability of the process. In this paper experimental work is presented. Experiments were conducted steel plates with rubber as tool material and alumina as abrasive. Time of polishing and spindle speed is measured and optimum time of polishing and spindle speed is decided. In this paper different parameters and their effect in HDP is also analyzed.

References

Downloads

Published

2016-10-05

Issue

Special Issue-6 (Oct 2016)

Section

Articles

How to Cite

Experimental Analysis of Hydrodynamic Polishing Process. (2016). International Journal of Current Engineering and Technology, 1(3.Special Issue), 141-143. https://ijcet.evegenis.org/index.php/ijcet/article/view/4370