A Review on Design and Development of Filament Winding Machine for Composite Materials

Authors

  • Dattatray Tele Department of Mechanical Engineering, Marathwada Mitra Mandal’s Institute of Technology, Pune 47, India Author
  • Nikhil Wakhare Department of Mechanical Engineering, Marathwada Mitra Mandal’s Institute of Technology, Pune 47, India Author
  • Ram Bhosale Department of Mechanical Engineering, Marathwada Mitra Mandal’s Institute of Technology, Pune 47, India Author
  • Pankaj Bharde Department of Mechanical Engineering, Marathwada Mitra Mandal’s Institute of Technology, Pune 47, India Author
  • Shital Nerkar Department of Mechanical Engineering, Marathwada Mitra Mandal’s Institute of Technology, Pune 47, India Author

Keywords:

Composite Material, Filament Winding, PVC, Strength

Abstract

Filament winding is a process of loading high degree of fibres to take advantage of high tensile in manufacturing of hollow, generally cylindrical products. The process affords the high strength to weight ratio laminates and provides a high degree of control over uniformity and fibre orientation. Filament wound structures can be accurately machined, and labour factor for filament winding is lower than other open molding processes. The filament wound composite pipes are fabricated using high strength fiber and resin matrix by hand lay-up using 2-axis filament winding machine. The present work, the low cost filament winding machine is designed and developed for the fabrication of FRP pipes and cylindrical specimens. The concepts of engine lathe supported by a wet winding method were being used in the development of filament winding machine.

References

Downloads

Published

2016-10-05

Issue

Special Issue-6 (Oct 2016)

Section

Articles

How to Cite

A Review on Design and Development of Filament Winding Machine for Composite Materials. (2016). International Journal of Current Engineering and Technology, 1(3.Special Issue), 74-77. https://ijcet.evegenis.org/index.php/ijcet/article/view/4356