Effect of Saw Parameters on Manganese Element Transfer in SS-202

Authors

  • Kuldeep Department of Mechanical Engineering, HCTM Kaithal, Haryana, India Author
  • R. P. Singh Department of Mechanical Engineering, HCTM Kaithal, Haryana, India Author
  • Sandeep Sharma Department of mechanical Engineering, GRIMT, Nachroun, Radaur, Haryana, India Author

Keywords:

Submerged arc welding, chemical composition, Taguchi design of experiment, S/N ratio, Experimental Design

Abstract

The aim of the present work was to study the effect of welding current, arc voltage, and weld speed on Manganese and element transfer and to optimize the process following suitable Taguchi experimental design. Beads on plate weld were deposited on SS-202 at different welding parameter combinations. During analysis of Manganese Welding voltage and current were found to be the most significant factors leading to changes in manganese element transfer. The results revealed that welding voltage has an appreciable influence on weld composition of Manganese element. Data investigated in this paper can be used to specify welding variables for desired manganese composition.

References

Downloads

Published

2015-06-30

Issue

Vol.5, No.3 (May/Jun 2015)

Section

Articles

How to Cite

Effect of Saw Parameters on Manganese Element Transfer in SS-202. (2015). International Journal of Current Engineering and Technology, 5(3), 1832-1835. https://ijcet.evegenis.org/index.php/ijcet/article/view/2241