Study and Synthesis of Titanium Nanotube Arrays at High Temperature by Electrochemical Method

Authors

  • S. Sivaguru Department of Mechanical Engg. V.R.S.College of Engg. & Technology, Tamilnadu, India Author
  • D.Sathesh Kumar Department of Mechanical Engg. V.R.S.College of Engg. & Technology, Tamilnadu, India Author

DOI:

https://doi.org/10.14741/

Keywords:

Titanium Nanotube Arrays, Electrochemical Method etc

Abstract

Titanium nanotube arrays were synthesized in ethylene glycol as base material. The effects of anodization at voltage and time, as well as chemical composition and pH of the electrolyte bath were studied. Using Ethylene glycol 99.5 % with 0.5% NH4F solution and deionized water 10%wt, resulted in nanotube length up to 430 nm after 1.5 hr anodization time at 65V voltage. Then it is dried in the process of heat treatment at 450’C in muffle furnace for 1- hours annealing. Finally UV- test and SEM to be used to characterize the Titanium nano tubes.

References

Downloads

Published

2015-12-31

Issue

Vol.5, No.6 (Nov/Dec 2015)

Section

Articles

How to Cite

Study and Synthesis of Titanium Nanotube Arrays at High Temperature by Electrochemical Method. (2015). International Journal of Current Engineering and Technology, 5(6), 3743-3747. https://doi.org/10.14741/