Waste Heat as an Alternate Source for Electricity

Authors

  • Shai Sundaram V.S Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, India Author
  • V. Elango Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, India Author
  • E. Devandiran Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, India Author
  • S.Sabeesh Kumar Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, India Author
  • S.Sharun Kutty Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, India Author
  • S. Sujith Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, India Author

DOI:

https://doi.org/10.14741/

Keywords:

Energy needs, alternate source of energy, low-grade energy, high grade energy, payback period

Abstract

Energy is an important unit for development. India is a developing country. Energy needs of various sectors has increased rapidly. In the present energy crisis scenario, many people think in terms of alternate energy sources and conservation methodologies. In the context of great uncertainty over future energy supplies, attention is being paid to conserve energy and use it as an alternate source.. Air conditioning units are designed to remove heat from interior spaces and reject it to the ambient air. While this heat is of low grade variety it still represents wasted energy. From an energy conservation point it would be desirable to reclaim this heat in a usable form. The best and most obvious form of heat recovery is for heating water. The main objective of this paper is experimental analysis of waste heat recovery system and utilization of the recovered heat as a source for generating hot water and thus saving electricity.

References

Downloads

Published

2015-10-31

Issue

Section

Articles

How to Cite

Waste Heat as an Alternate Source for Electricity. (2015). International Journal of Current Engineering and Technology, 5(5), 3340-3343. https://doi.org/10.14741/