EDM of Heat Treated-Al 7075

Authors

  • Rahul Rawat Mechanical Engineering Department, Modern Institute of Engineering and Technology (Mohri), Kurukshetra, India Author
  • Vishal Kumar Mechanical Engineering Department, Modern Institute of Engineering and Technology (Mohri), Kurukshetra, India Author

DOI:

https://doi.org/10.14741/

Keywords:

EDM, AA 7075, CCD, TWR.

Abstract

In this paper the electric discharge machining of heat treated AA-7075 were carried and tool wear rate was investigated. Pulse on-time, pulse off-time, servo voltage and peak current were the input process parameters. Experiments were conducted according to central composite design. Pulse on-time had the maximum contribution on tool wear rate followed by pulse off-time and servo voltage.

References

Downloads

Published

2015-10-31

Issue

Vol.5, No.5 (Sep/Oct 2015)

Section

Articles

How to Cite

EDM of Heat Treated-Al 7075. (2015). International Journal of Current Engineering and Technology, 5(5), 3150-3153. https://doi.org/10.14741/